Biometer Ultra High Throughput Automatic Nucleic Acid Testing System

products

Biometer Ultra High Throughput Automatic Nucleic Acid Testing System

Short Description:

Ultra-high-throughput sample preparation system

Multiple nucleic acid extractors, liquid workstations

Membrane sealing machines and qPCR equipment

Traceable whole-process Information


  • Model: HSJC-MJ-MRA-CDF-800
  • Dimension: 7.4*2.4*2m
  • Product Detail

    Product Tags

    Introduction

    This system is a set of ultra-high-throughput automatic nucleic acid testing system that can truly realize “sample in - result out”. The system integrates an ultra-high-throughput sample preparation system CDS-600, as well as multiple nucleic acid extractors, liquid workstations, membrane sealing machines and qPCR equipment. The system can automate the entire process from capping and subpackaging to nucleic acid extraction, PCR system construction, membrane sealing and qPCR detection. At the same time, the system has a built-in HEPA filter system and a UV disinfection system, and is equipped with a transfer window. It implements strict pre-PCR and post-PCR partitions to ensure biological safety and meet the requirements of relevant laws and regulations.

     

    Biometer Ultra High Throughput Automatic Nucleic Acid Testing System

    Biometer Ultra High Throughput Automatic Nucleic Acid Testing System

    Biometer Ultra High Throughput Automatic Nucleic Acid Testing System

    Biometer Ultra High Throughput Automatic Nucleic Acid Testing System

     

    Features

    1. Ultra-high Throughput

    Length, width and height are about 7.4*2.4*2m, and the daily testing throughput can reach 11,000 pcs;

    The reagents are open and compatible with a variety of common domestic and imported reagent kits.

    2. Strict Partitions

    Equipped with HEPA filter, UV disinfection equipment and unique anti-cross-contamination design to effectively protect the safety of labor and samples;

    The design of dual mechanical arms in the front and rear areas of the PCR is adopted. The two arms are respectively equipped with negative pressure HEPA filters, and are equipped with a transfer window to prevent aerosol pollution;

    Equipped with waste liquid and waste collection module, to realize solid-liquid separation and prevent system pollution.

    3. Integrated Subpackaging

    Integrate the ultra-high-throughput CDS-600 virus sample preparation system, which can realize the follow-up process directly after subpackaging, without human operation;

    The whole process is truly automated, samples are in, and results are out.

    4. One-key Start

    The software is easy to operate: training is operation, no need to rely on professional and technical personnel;

    The whole process is automated: from the input of the sample to be tested to the final output of the test result, the whole process does not require manual involvement.

    5. Whole-process Information Traceable

    Traceable: Cooperate with the laboratory information management system, record information throughout the process, and automatically output reports.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Product categories